4408: Veneer sheets and sheets for plywood, etc, =<6mm thick
COMESA
440810
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm,coniferous
440831
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of Dark Red Meranti
440839
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of tropical wood s
440890
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm (excl. of 4408.10-44
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product
SADC
440810
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm,coniferous
440831
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of Dark Red Meranti
440839
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of tropical wood s
440890
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm (excl. of 4408.10-44
- Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product
EAC
440810
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm,coniferous
440831
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of Dark Red Meranti
440839
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of tropical wood s
440890
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm (excl. of 4408.10-44
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product - Manufacture from any other heading is recognized as a substantial process
EU GSP
Applicable HS codes (includes 2 exceptions)
440810
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm,coniferous
440831
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of Dark Red Meranti
440839
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm, of tropical wood s
440890
Sheets for veneering (including those obtained by slicing laminated wood), for plywood/for similar laminated wood & other wood, sawn lengthwise, sliced/peeled, whether/not planed, sanded, spliced/end-jointed, of a thickness not> 6 mm (excl. of 4408.10-44
- Manufacture from materials of any heading, except that of the product