7207: Semi-finished products of iron or non-alloy steel
COMESA
720711
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (incl. square) cross-section, the width measuring < twice the thickness
720712
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (other than square) cross-section
720719
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, n.e.s. in 72.07
720720
Semi-finished products of iron/non-alloy steel, containing by weight 0.25%/more of carbon
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product, except from materials of heading 72.06
SADC
720711
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (incl. square) cross-section, the width measuring < twice the thickness
720712
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (other than square) cross-section
720719
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, n.e.s. in 72.07
720720
Semi-finished products of iron/non-alloy steel, containing by weight 0.25%/more of carbon
- Manufacture in which all the materials used are classified within a heading other than that of the product
EAC
720711
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (incl. square) cross-section, the width measuring < twice the thickness
720712
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (other than square) cross-section
720719
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, n.e.s. in 72.07
720720
Semi-finished products of iron/non-alloy steel, containing by weight 0.25%/more of carbon
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product, except from heading 72.06 - Processing of ingots into semi finished state is not considered substantial transformation.
EU GSP
720711
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (incl. square) cross-section, the width measuring < twice the thickness
720712
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, of rectangular (other than square) cross-section
720719
Semi-finished products of iron/non-alloy steel, containing by weight <0.25% of carbon, n.e.s. in 72.07
720720
Semi-finished products of iron/non-alloy steel, containing by weight 0.25%/more of carbon
- Manufacture from materials of heading 7201, 7202, 7203, 7204 or 7205
References:
- 7201: Pig iron and spiegeleisen in pigs,blocks or other primary forms
- 7202: Ferro-alloys
- 7203: Ferrous producsts obtained by direct reduction or iron ore,in lumps etc.
- 7204: Ferrous waste,scrap remelting scrap ingots or iron or steel
- 7205: Granules and powders,of pig iron,spiegeleisen,iron or steel
- 7206: Iron,non-alloy steel in ingots/other primary forms(except of Head 72.03)