7408: Copper wire
COMESA
740811
Copper wire, of refined copper of which the maximum cross-sectional dim. exceeds 6mm
740819
Copper wire, of refined copper (excl. of 7408.11)
740821
Wire of copper-zinc base alloys (brass)
740822
Wire of copper-nickel base alloys (cupro-nickel)/copper-nickel-zinc base alloys (nickel silver)
740829
Wire of copper alloys (excl. of 7408.21 & 7408.22)
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product
SADC
740811
Copper wire, of refined copper of which the maximum cross-sectional dim. exceeds 6mm
740819
Copper wire, of refined copper (excl. of 7408.11)
740821
Wire of copper-zinc base alloys (brass)
740822
Wire of copper-nickel base alloys (cupro-nickel)/copper-nickel-zinc base alloys (nickel silver)
740829
Wire of copper alloys (excl. of 7408.21 & 7408.22)
- Manufacture in which all the copper materials used must be wholly produced
EAC
740811
Copper wire, of refined copper of which the maximum cross-sectional dim. exceeds 6mm
740819
Copper wire, of refined copper (excl. of 7408.11)
740821
Wire of copper-zinc base alloys (brass)
740822
Wire of copper-nickel base alloys (cupro-nickel)/copper-nickel-zinc base alloys (nickel silver)
740829
Wire of copper alloys (excl. of 7408.21 & 7408.22)
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product provided that the cross-sectional area of the rods is reduced by at least 50% or their diameter is reduced to 3 mm or less. - This excludes the process of slight/minor
EU GSP
740811
Copper wire, of refined copper of which the maximum cross-sectional dim. exceeds 6mm
740819
Copper wire, of refined copper (excl. of 7408.11)
740821
Wire of copper-zinc base alloys (brass)
740822
Wire of copper-nickel base alloys (cupro-nickel)/copper-nickel-zinc base alloys (nickel silver)
740829
Wire of copper alloys (excl. of 7408.21 & 7408.22)
- Manufacture:
- from materials of any heading, except that of the product, and
- in which the value of all the materials used does not exceed 50% of the ex-works price of the product