8460: Machine-tools for deburring,lapping etc. other than gear cutting etc.
COMESA
846011
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846019
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846021
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846029
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846031
Sharpening (tool/cutter grinding) machines, numerically controlled
846039
Sharpening (tool/cutter grinding) machines, other than numerically controlled
846040
Honing/lapping machines
846090
Machine-tools for deburring/sharpening/grinding/honing/lapping/polishing/othwise finishing metal/cermets by means of grinding stones, abrasives/polishing products, other than gear cutting, gear grinding/gear finishing machines...n.e.s. in 84.60
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product, provided the value added is at least 35% of the ex-factory cost of the finished product
SADC
846011
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846019
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846021
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846029
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846031
Sharpening (tool/cutter grinding) machines, numerically controlled
846039
Sharpening (tool/cutter grinding) machines, other than numerically controlled
846040
Honing/lapping machines
846090
Machine-tools for deburring/sharpening/grinding/honing/lapping/polishing/othwise finishing metal/cermets by means of grinding stones, abrasives/polishing products, other than gear cutting, gear grinding/gear finishing machines...n.e.s. in 84.60
- Manufacture in which the value of all the materials used does not exceed 60% of the ex-works price of the product
EAC
846011
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846019
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846021
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846029
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846031
Sharpening (tool/cutter grinding) machines, numerically controlled
846039
Sharpening (tool/cutter grinding) machines, other than numerically controlled
846040
Honing/lapping machines
846090
Machine-tools for deburring/sharpening/grinding/honing/lapping/polishing/othwise finishing metal/cermets by means of grinding stones, abrasives/polishing products, other than gear cutting, gear grinding/gear finishing machines...n.e.s. in 84.60
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product, except from heading 84.66 - This excludes the mere assembly of parts.
EU GSP
846011
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846019
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846021
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, numerically controlled
846029
Grinding machines other than flat-surface, in which the positioning in any one axis can be set up to an accuracy of at least 0.01mm, other than numerically controlled
846031
Sharpening (tool/cutter grinding) machines, numerically controlled
846039
Sharpening (tool/cutter grinding) machines, other than numerically controlled
846040
Honing/lapping machines
846090
Machine-tools for deburring/sharpening/grinding/honing/lapping/polishing/othwise finishing metal/cermets by means of grinding stones, abrasives/polishing products, other than gear cutting, gear grinding/gear finishing machines...n.e.s. in 84.60
- Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product