8461: Machine-tools for planing,shaping,gear cutting elsewhere specified
COMESA
846120
Shaping/slotting machines working by removing metal/cermets
846130
Broaching machines working by removing metal/cermets
846140
Gear cutting/gear grinding/gear finishing machines working by removing metal/cermets
846150
Sawing/cutting-off machines working by removing metal/cermets
846190
Machine-tools for planing & other machine-tools working by removing metal/cermets, n.e.s. in 84.61
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product, provided the value added is at least 35% of the ex-factory cost of the finished product
SADC
846120
Shaping/slotting machines working by removing metal/cermets
846130
Broaching machines working by removing metal/cermets
846140
Gear cutting/gear grinding/gear finishing machines working by removing metal/cermets
846150
Sawing/cutting-off machines working by removing metal/cermets
846190
Machine-tools for planing & other machine-tools working by removing metal/cermets, n.e.s. in 84.61
- Manufacture in which the value of all the materials used does not exceed 60% of the ex-works price of the product
EAC
846120
Shaping/slotting machines working by removing metal/cermets
846130
Broaching machines working by removing metal/cermets
846140
Gear cutting/gear grinding/gear finishing machines working by removing metal/cermets
846150
Sawing/cutting-off machines working by removing metal/cermets
846190
Machine-tools for planing & other machine-tools working by removing metal/cermets, n.e.s. in 84.61
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product, except from heading 84.66 - This excludes the mere assembly of parts.
EU GSP
846120
Shaping/slotting machines working by removing metal/cermets
846130
Broaching machines working by removing metal/cermets
846140
Gear cutting/gear grinding/gear finishing machines working by removing metal/cermets
846150
Sawing/cutting-off machines working by removing metal/cermets
846190
Machine-tools for planing & other machine-tools working by removing metal/cermets, n.e.s. in 84.61
- Manufacture in which the value of all the materials used does not exceed 40% of the ex-works price of the product