2518: Dolomite/ dolomite roughly trimmed or merely cut/ agglomereted dolomite
COMESA
251810
Dolomite, not calcined/sintered, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251820
Calcined/sintered dolomite, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251830
Dolomite ramming mix
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product
SADC
251810
Dolomite, not calcined/sintered, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251820
Calcined/sintered dolomite, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251830
Dolomite ramming mix
- Manufacture in which all the materials used are classified within a heading other than that of the product
EAC
251810
Dolomite, not calcined/sintered, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251820
Calcined/sintered dolomite, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251830
Dolomite ramming mix
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture in which all the minerals of this chapter used are wholly produced. - The origin of products of this chapter shall be where the minerals are obtained in their natural or unprocessed state.
EU GSP
Applicable HS codes (includes 2 exceptions)
251810
Dolomite, not calcined/sintered, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251820
Calcined/sintered dolomite, incl. dolomite roughly trimmed/merely cut, by sawing/othw., into blocks/slabs of a rectangular (incl. square) shape
251830
Dolomite ramming mix
- Manufacture from materials of any heading, except that of the product