7219: Flat-rolled products of stainless steel,of a width of 600mm or more
COMESA
721911
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness >10mm
721912
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 4.75mm/more but not >10mm
721913
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 3mm/more but < 4.75mm
721914
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of <3mm
721921
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness >10mm
721922
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 4.75mm/more but not >10mm
721923
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 3mm/more but <4.75mm
721924
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of <3mm
721931
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75mm/more
721932
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 3mm/more but <4.75mm
721933
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness >1mm but <3mm
721934
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5mm/more but not >1mm
721935
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of < 0.5mm
721990
Flat-rolled products of stainless steel, of a width of 600mm/more, n.e.s. in 72.19
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product, except from materials of heading 72.20
SADC
Applicable HS codes (includes 2 exceptions)
721911
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness >10mm
721912
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 4.75mm/more but not >10mm
721913
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 3mm/more but < 4.75mm
721914
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of <3mm
721921
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness >10mm
721922
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 4.75mm/more but not >10mm
721923
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 3mm/more but <4.75mm
721924
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of <3mm
721931
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75mm/more
721932
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 3mm/more but <4.75mm
721933
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness >1mm but <3mm
721934
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5mm/more but not >1mm
721935
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of < 0.5mm
721990
Flat-rolled products of stainless steel, of a width of 600mm/more, n.e.s. in 72.19
- Manufacture in which all the materials used are classified within a heading other than that of the product
Exception: Flat-rolled products of stainless steel, further worked than hot-rolled
EAC
721911
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness >10mm
721912
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 4.75mm/more but not >10mm
721913
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 3mm/more but < 4.75mm
721914
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of <3mm
721921
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness >10mm
721922
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 4.75mm/more but not >10mm
721923
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 3mm/more but <4.75mm
721924
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of <3mm
721931
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75mm/more
721932
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 3mm/more but <4.75mm
721933
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness >1mm but <3mm
721934
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5mm/more but not >1mm
721935
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of < 0.5mm
721990
Flat-rolled products of stainless steel, of a width of 600mm/more, n.e.s. in 72.19
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product, except from 72.20 - This excludes the process of mere change of width which is not considered substantial.
EU GSP
721911
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness >10mm
721912
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 4.75mm/more but not >10mm
721913
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of 3mm/more but < 4.75mm
721914
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, in coils, of a thickness of <3mm
721921
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness >10mm
721922
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 4.75mm/more but not >10mm
721923
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of 3mm/more but <4.75mm
721924
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than hot-rolled, not in coils, of a thickness of <3mm
721931
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 4.75mm/more
721932
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 3mm/more but <4.75mm
721933
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness >1mm but <3mm
721934
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of 0.5mm/more but not >1mm
721935
Flat-rolled products of stainless steel, of a width of 600mm/more, not further worked than cold-rolled (cold-reduced), of a thickness of < 0.5mm
721990
Flat-rolled products of stainless steel, of a width of 600mm/more, n.e.s. in 72.19
- Manufacture from ingots or other primary forms of heading 7218