7226: Flat-rolled products of other alloy steel,of a width of less than 600mm
COMESA
722611
Flat-rolled products of silicon-electrical steel, grain-oriented (excl. stainless steel), of a width of <600mm
722619
Flat-rolled products of silicon-electrical steel, other than grain-oriented (excl. stainless steel), of a width of <600mm
722620
Flat-rolled products of high speed steel (excl. stainless steel), of a width of <600mm
722691
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than hot-rolled
722692
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than cold-rolled (cold-reduced)
722699
Other n.e.s. in 72.26 flat-rolled products of other alloy steel (excld. Stainless/silicon-electrical/high speed steel), of a width of less than 600 mm.
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified in a heading other than that of the product, except from materials of heading 72.25
SADC
Applicable HS codes (includes 2 exceptions)
722611
Flat-rolled products of silicon-electrical steel, grain-oriented (excl. stainless steel), of a width of <600mm
722619
Flat-rolled products of silicon-electrical steel, other than grain-oriented (excl. stainless steel), of a width of <600mm
722620
Flat-rolled products of high speed steel (excl. stainless steel), of a width of <600mm
722691
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than hot-rolled
722692
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than cold-rolled (cold-reduced)
722699
Other n.e.s. in 72.26 flat-rolled products of other alloy steel (excld. Stainless/silicon-electrical/high speed steel), of a width of less than 600 mm.
- Manufacture in which all the materials used are classified within a heading other than that of the product
Exception: Flat-rolled products of other alloy steel, further worked than hot-rolled
EAC
722611
Flat-rolled products of silicon-electrical steel, grain-oriented (excl. stainless steel), of a width of <600mm
722619
Flat-rolled products of silicon-electrical steel, other than grain-oriented (excl. stainless steel), of a width of <600mm
722620
Flat-rolled products of high speed steel (excl. stainless steel), of a width of <600mm
722691
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than hot-rolled
722692
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than cold-rolled (cold-reduced)
722699
Other n.e.s. in 72.26 flat-rolled products of other alloy steel (excld. Stainless/silicon-electrical/high speed steel), of a width of less than 600 mm.
Goods are considered originating if they have been produced in the member States wholly or partially from materials imported from outside the member States or of undetermined origin provided that:
- The c.i.f. value of those materials does not exceed 60% of the total cost of the materials used in the production of the goods;
- The value added resulting from the process of production accounts for at least 35% of the ex-factory cost of the goods;
- Manufacture from materials classified within a heading other than that of the product except from heading 72.25 - This excludes the process of mere change of width which is not considered substantial transformation.
EU GSP
722611
Flat-rolled products of silicon-electrical steel, grain-oriented (excl. stainless steel), of a width of <600mm
722619
Flat-rolled products of silicon-electrical steel, other than grain-oriented (excl. stainless steel), of a width of <600mm
722620
Flat-rolled products of high speed steel (excl. stainless steel), of a width of <600mm
722691
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than hot-rolled
722692
Flat-rolled products of other alloy steel (excl. stainless/silicon-electrical/high speed steel), of a width of <600mm, not further worked than cold-rolled (cold-reduced)
722699
Other n.e.s. in 72.26 flat-rolled products of other alloy steel (excld. Stainless/silicon-electrical/high speed steel), of a width of less than 600 mm.
- Manufacture from ingots or other primary forms of heading 7206, 7218 or 7224
References:
- 7206: Iron,non-alloy steel in ingots/other primary forms(except of Head 72.03)
- 7218: Stainless steel in ingots etc.semi-finished products of stainless steel
- 7224: Other alloy steel in ingots etc.semi-finished prdts of other alloy steel
- 7225: Flat-rolled products of other alloy steel,of a width of 600mm or more
- 7226: Flat-rolled products of other alloy steel,of a width of less than 600mm